Dewatering Pumps

Submersible Heavy Duty Sewage Pumps

Performance Range

Flow rate up to 24,000 l/min. (1440 m³/hr)

Dynamic head up to 38 m.

Applications

Drainage of waste water from the liberation tank, purifying tank and sewage tank in water treatment plant.

Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory.

Sewage management, accumulated water, septic tank, stock farm.

Pumping sewage from single and multi family dwellings.

Pumping sewage from hotels, restaurants, schools and public buildings.

Features

International standard design : VCT cable,thermal overload protector, silicon carbide mechanical seal, high grade cast iron, good quality and performance.

P / E Multiple impeller designs to handle solids laden sewage and/or fibrous substance

For Extra protection, an oil seal ring has been installed under the oil chamber. This lip seal helps prevent the ingress of silt and sand into the lower seal chamber.

Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.

Full range offering low to high head and flow capabilities, with compact and easy installation. Also available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit.

Oil lip seal mounted outside of seal chamber stops solids gathering around seal faces.

Special Features on request

Other Voltages.

Available in 60Hz.

Self Priming Non - Clog Pumps

Self Priming Non - Clog Pumps

Performance Range

Flow rate up to 1440 l/min.

Dynamic head up to 34 m.

Applications

Where self priming action is required.

Industiral – Pumping petroleum products, chemicals, effluents, sewage, ash-water etc.

Marine – Pumping water from docks, ports, vessels.

Mobile machinery – Cooling water for marine engines and shovels.

Public utilities – Sewage pumping.

Features

Quick automatic self priming action.

Repairs possible without disturbing the pipe connections.

Non-clogging impeller to handle suspended solids.

Portable when fitted on trolley/trailer.

No need for foot valve.

Perfect alignment due to monobloc construction.

Efficiency at par with internationally available pumps.

Class of insulation ‘B’

Solid partical handling size from 7mm to 15mm.

Centrifugal Monoblock Pumps

Self Priming Non - Clog Pumps

Performance Range

Flow rate up to 2500 l/min. (150 m³/h)

Dynamic head up to 84 mts.

Motor

2 - pole induction motor 50Hz (n = 2900 RPM).

Three phase :400V +5 -15.

Insulation class F.

Protection IP 44.

Constructed in accordance with IEC 34.

Applications

For clean liquids without abrasives, which arenon - aggressive for the pump materials.(Solids content up to 0.2 %)

For Irrigation of Fields / Farms.

For water supply.

For civil and industrial applications.

For fire fighting applications.

For heating, cooling, air - conditioning and circulation plants.

Operating Conditions

Liquid temperature up to 90°.

Ambient temperature up to 50°.

Total suction lift up to 8mts.

Continuous duty.

COMPONENTS

Pump casing

Bracket

Impeller

Stator Frame

Shaft

MATERIAL

Grey Iron

Grey Iron

Grey Iron / Bronze

Grey Iron

Carbon Steel

Special Features on request

Other Voltages.

Higher liquid or ambient temperatures.

Available in mechanical seal.

Available in 60Hz.